Remove VLAN-tagged interface group from Tenant/Application Profiles/Endpoint Group

Goal

This workflow removes a Virtual LAN (VLAN) tagged interface group (ifgrp) from the failover group. This workflow then removes the Virtual Port Channel (VPC) bundle with VLAN encapsulation from the Tenant/Application Profiles/endpoint group (EPG).

Prerequisites

1.       You must be running ONTAP 9.0 or later.

2.       You must have added the following Application Profile Interface Controller (APIC) user credentials in the Credentials window:

Input Parameters

Values

Match

Exact

Type

APIC

Name/IP

IP address

User name

Domain administrator name

Password

Domain administrator password

3.       You must have added the APIC credentials with Client ID and Client Secret in the Data Sources window.

4.       Tenant/Application Profiles/EPG should be present in APIC.

5.       VLAN-tagged interface group should be present in the FAS storage system.

User Inputs

To execute this workflow, provide the required information in the following fields:

         User Inputs

         APIC Details

1.       User Inputs

         Cluster* [Mandatory]: From the drop-down menu select the cluster name.

Note: The drop-down menu also shows the primary address, name, and version associated with each cluster name.

         Node* [Mandatory]: From the drop-down menu, select the node.

Note: The drop-down menu also shows the model associated with each node name.

         FailOvergroup* [Mandatory]: From the drop-down menu, select the failover group.

         Port* [Mandatory]: From the drop-down menu, select the port.

Note: The drop-down menu also shows the broad cast domain associated with each port name.

         Vserver* [Mandatory]: From the drop-down menu, select the Vserver.

2.       APIC Details

You can select the details of the Tenant/Application Profiles/EPG.

         Controller* [Mandatory]: From the drop-down menu, select the APIC controller IP address.

         Tenant* [Mandatory]: From the drop-down menu, select a tenant. A tenant is policy container that enables the domain-based admin access control.

         ApplicationProfile* [Mandatory]: From the drop-down menu, select the application profile created for the tenant. An application profile is a logical container used for grouping EPGs.

         EndPointGroup* [Mandatory]: From the drop-down menu, select an endpoint group. An EPG is a logical entity that contains a collection of endpoints.

 

         VpcBundleName* [Mandatory]: From the drop-down menu, select the VPC bundle name.

Note: The drop-down menu also shows the endpoint group path and its associated node name.

 

Result

The workflow results in removing VLAN-tagged interface group from the EPG.